HomeSitemapContact us

 
 
Please Install Flash Player
Download from here
 
Diagnosis Engine Tester

ProductsDiagnostic Tools • Diagnosis Engine Tester


Diagnosis Engine TesterENGINE TESTER FOR SPECIFIC DIAGNOSIS
- - - -­
PC based Engine Analyser able to carry out the following functions:
  • Double trace oscilloscope with memory.
  • Primary and Secondary (raster parade and single cylinder)
  • Oscilloscope two channels
  • Start up and recharging diagnosis
  • Advance with Timing Light and magnetic captor
  • Dynamic compression
  • DIS ignitions
  • Bargraphics
  • Data Bank included
  • To be used with PC operating in Windows 98 or upper versions

    TECHNICAL FEATURES:
  • Mains Voltage: 230 Vac with power supply included
  • Mains Frequency: 50Hz (:!:20f0)
  • Power Consumption: 0,5 W max
  • Dimensions (device only): 31 OX150X85 mm . Weight (device only): 1 kg approx.
    FUNCTIONS:-
  • LAB SCOPE:
  • Sampling rate: 2 million samples per second
  • Band width: (-3d B) DC - 60KHz
  • Sweep rate: 100 J.1s/div to 10 s/div.
  • Voltage range: :!: 125 mV/div. to :!:50 V/div.
  • Accuracy: 0.50f0
  • Time base: 100 J.1s/div. to 10 s/div.
  • Trigger with auto reset capability

    IGNITION:

  • RPM range: 100 to 9999 min-1 (resolution of 1 RPM) . Primary voltage: 0 to 750V
  • Secondary display ranges:
  • 9 kV to +45 kV
  • 5 kV to + 25 kV
  • 1.2 kV to + 6 kV
  • Time base: 1.0 ms/div. to 10ms/div.
  • Burn time 0 to 10ms (0, 1 ms resolution)
  • Dwell range
  • Degrees: 0° to 360°, 1 ° resolution
  • Percent: 0 to 1000f0, 10f0 resolution
  • Burn kV: 0 to 6 Kv

    ENVIRONMENTAL OPERATING SPECIFICATION

  • Operating temp. 0 to 45°C
  • Storage temp. -5 to 50°C
  • Operating and storage humidity 20 to 85 Ofo
  • Dust, water and grease resistant

     



    Home | Quality Control Setup | Contact Us | Enquiry