Home • Products • Smoke Meters • Diesel Emissions Smoke Meters

9000: Smoke Meter for diesel emissions complete with remote control, 24 col. Printer and roll stand. Thanks to its sophisticated technology Ekos 9000 is an advanced unit able to execute accurate opa~ity tests Some of its features such as warmed chamber and electro­valve of smoke interception, cleaning pump guarantee a accurate reading of the measured value. The software installed in the unit helps the operator during the test execution according to all International different regulations. 9010: Smoke Module to be connected directly to Gas analysers Eurgas 8020, TotalGas 8050 , Portable TotalGas 8070-8071 or to a PC through a special software 7102 USB or LTP [optional] MAIN FEATURES Heated chamber smoke on-off solenoid valve automatic cleaning pump. Flow: partial and continuous Bench length: 430 :to.5 mm Actual response time: < 0.4 sec. Electrical response time: 0.91 :t 0,01 sec. Total response time: ::; 0.99 sec. Resetting: automatic with Solenoid valve Resetting Frequency: automatic Calibration: automatic Sender: 6v 10W halogen lamp Receiver: photodiode Chamber Temp: 90 :t 2°C (normal operating conditions) Slide cleaning: automatic with dedicated pump Output: RS232 CRx-Tx PC standard) Power supply Voltage: 110 -:- 230V (+ 1 0%-15%) 50/60Hz (:t2%) (internal voltage change set in the factory) . Power rating: 300 W Mains fuses: T4A -250Vac (5x2OJ Operating temperature: 0 -:- +40°C Relative humidity: up to 90% Pollution degree: II (IEC 61010-1) Dimensions (LxHxm: 61 x 23 x 22 em Weight: approx. 12 Kg Storage temperature: -15°C -:- +60°C OPTIONAL ACCESSORIES USB/RS23 Adapter 10005 Roll stand 9500 for 9010 only.